Shop headings: New Spares | Used Spares | Accessories | Brands
Brand new genuine Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016
Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
This is a genuine Valeo starter made in the EU- please do not confuse with the cheap Chinese copies that sometimes appear on eBay.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Please note you can get a discount of £30 on this item if you part exchange your existing faulty starter motor. See ELA30837 for less expensive alternative part
This part is due back in stock soon, call 01484 841395 to reserve yours
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£231.00
INC VAT
£192.50 EX VAT
Brand new right hand original "Lego" type switchgear and twistgrip with switches for starter and run/kill.
Previously unavailable new and ideal for your restoration project.
Comes with attached 4 pin molex connector, molex pins and rubber boot, ready to be plugged into your standard loom.
Twistgrip for standard dual throttle cables.
See ELA17061 and ELA14055 for left hand switches.
Sorry, this part is no longer available.
Sorry this item is out of production
Pair of performance Dyna 12 volt 5 ohm single lead ignition coils with angled HT lead socket. These are a cooler running coil that offer improved starting and performance
Dyna Performance Replacment Coils are high tech, top quality coils, designed for maximum performance. They produce spark voltages in excess of 30,000 volts and spark energies second to none. Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils. Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.
These are a different size and shape from the original coils so you will need to fabricate a suitable coil mount.
Individual coils available by special order, call us for details. See ELA00001 for crimp on HT lead connector
This part is due back in stock soon, call 01484 841395 to reserve yours
1471650
£190.00
INC VAT
£158.33 EX VAT
Round 12v two pin flasher relay for LED indicators. For use with aftermarket LED indicators
Includes rubber for attaching to bike.
NB Only suitable for LED indicators. Will not work in modern V7 models because these do not utilise a flasher unit.
This part is available by special order, request a quote
£12.00
INC VAT
£10.00 EX VAT
Pair of low and high chrome Voxbell Fiamm type snail horns. Very loud and Italian!
Chromed plastic grill and cover, also known as Guzzi ref. 28743761. Sold with brackets, can be fitted to most Guzzis
This part is available by special order, request a quote
28743760-z 28743760 GU28743760 28 74 37 60
2874 3760 2874.3760 28.74.37.60
£62.00
INC VAT
£51.67 EX VAT
Screw in brakelight switch for linked system proportioning valve or splitter
Screws into yoke mounted manifold for hand brake
This part is available by special order, request a quote
25657001 GU25657001 25 65 70 01
2565 7001 2565.7001 25.65.70.01
£19.90
INC VAT
£16.58 EX VAT
Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.
Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection See ACA96001 for a spare set of charging leads (e.g. for a separate bike).
This part is due back in stock soon, call 01484 841395 to reserve yours
£57.00
INC VAT
£47.50 EX VAT
Dimensions:
195mm diameter, M8 threaded mounting holes, approx 195mm between mounting holes. 13.5cm front to back, 7cm from mounting holes to rear of bowl
Complete shallow bowl 190mm chrome headlight unit. Includes a pilot / parking light. A shallow bowl makes it especially suitable for mounting on Moto Guzzis underneath the instruments
Homologated for road use.
Supplied complete with H4 bulb, pilot light and four short wires (without connectors). This headlight will fit fairing cowling FAA99575 for Le Mans 1 conversions if trim strip is not fitted to inside edge of fairing. NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems
Availability varies on this part, check availability
£88.00
INC VAT
£73.33 EX VAT
Complete shallow bowl 190mm gloss black headlight unit.
Fits Le Mans 1 headlamp cowling FAA99575. Supplied complete with bulb and three short wires (without connectors). NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems. Neutral beam pattern and not E Marked
This part is due back in stock soon, call 01484 841395 to reserve yours
£95.00
INC VAT
£79.17 EX VAT
Red NGK spark plug resistor cap with rubbers
Also known as suppressor cap
This part is due back in stock soon, call 01484 841395 to reserve yours
£6.00
INC VAT
£5.00 EX VAT